■
8
SPECIFICATIONS (PRINTER SP12)
1. Printer
…………………………………………………Model: MTP102
Printing system: Thermal serial dot printing system
Printing method: One-way printing (from left to right)
Printing speed: Approx. 1.5 lines/sec. (DC 5 0V. at 25℃)
Number of digits printed: 13 digits/line (including space)
2. Recording paper ………………………………………Roll paper S-950
38mm (width) (＋0〜0.5mm), overall length 2,400 mm or more (approx.
700 lines can be printed per roll.)
3. Power supply …………………………………………DC 6.0V (SUM-3 or AM3 dry battery, 4 pieces)
4. Power consumption ……………………………………During printing: Approx. 1.5W (DC 6.0V)
With power switch turned "ON" (No printing): Approx. 0.02W (DC 6.0V)
5. Battery life ……………………………………………Manganese battery: Approx. 10,000 lines can be printed. (Equivalent to
approx. 14 rolls)
Alkaline manganese battery: Approx. 20,000 lines can be printed.
(Equivalent to approx. 28 rolls)
(When the printer is connected to stopwatch S111, S119, S123, S124,
S143, S701 or S930, and prints out data continuously at 24℃ , the
battery life may vary depending on the battery type, condition of use, etc.)
6. Operational temperature range ………………………0℃〜40℃ (The depth of printout does not change even if the
temperature changes.)
7. Outside dimensions and weigh ………………………130.8mm (Length)×81.6mm (Width)×28.5mm (Thickness): Approx.
220g (including the batteries and roll paper)
※The above specifications are subject to change without prior notice, for product improvement.
