⑦How to use the memory recall function
・The data obtained in the measurement can be recalled and displayed.
・Up to 100 blocks of data or 300 data can be stored and recalled.
・Besides being recalled and displayed, the data in memory can also be
printed out.
(Refer to "
■
４
⑤ printout")
・The stored data is recalled by pressing button
○
Ｃ
. The data is recalled
successively if the button is kept pressed.
・The stored data can be recalled while the stopwatch is measuring.
・The data can be stored in memory even while the stopwatch is connected to
the printer to print out the data during the measurement.
・Order of recalling the stored data
・Button operation while the stored data is recalled
With each press of button
○
Ｃ
The data is recalled starting from the oldest one.
The data is recalled starting from the newest one.
When the stopwatch is stopped
When the stopwatch is in use
Display before recall
Reset
Stopped
Measuring
Button
○
A
Returning to the dis-
play before recall
Returning to the dis-
play before recall
Stopping the mea-
surement
Button
○
Ｂ
Clearing the data in
memory
Returning to the dis-
play before recall
Measuring lap/split
time
Button
○
Ｄ
Returning to the dis-
play before recall
Returning to the dis-
play before recall
Returning to the dis-
play before recall
○When the stopwatch is reset or stopped：
The data is recalled starting from the first data in block "1".
<Ex.) When the display is reset to "00" in block "4".>
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
Block no.
Fastest LAP no. Fastest LAP
Lap/Split no.
Split time
Stop time
Recall button
(Fastest lap display)
（Start data）
（RESET）
The fastet lap time in this block is
displayed together with the lap number.
Lap/split data in block "1"
Lap/Split８ Split time 2:1'14"12
Lap time 16'42"33
（STOP）
Stop time 2:11'17"99
Start date
Start time
BLOCK2
Start data
BLOCK3
Start data
BLOCK3
Stop time
○
C
○
C
○
C
○
C
Button
○
C
○
C
○
C
○
C
○
C
Data in block "1"
Back to reset display in
block''4''
○When the stopwatch is measuring:
The data is recalled starting from the newest one.
<Ex.) When the measurement of the third lap /split time in block "4" has been completed>
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
BLOCK3
Start data
BLOCK3
Fastest lap
BLOCK3
Stop time
BLOCK1
Lap/Split time1
BLOCK4
Lap/Split time3
BLOCK4
Lap/Split time3
Lap/Split time1
Lap/Split time3
Lap/Split time2
○
C
○
C
○
C
○
C
○
C
○
C
○
C
○
C
○
C
Data in block "4"
The colon (:) starts flashing.
Fastest lap no.
(Display of the fastest lap time in block "4")
While the stopwatch is measuring, the measurement in
progress is shown in the bottom row of the display.
⑧How to clear the stored data (All clear of data)
・The memory clear function is useful in the following cases.
a）When the stored data becomes unnecessary.
b）When the residual memory is not sufficient for a new measurement.
・Once the following steps are taken to clear the data, all the stored data is erased from
memory. The stored data cannot be erased one by one or block by block.
①While the stopwatch is measuring or
when the digits are not reset after
the end of the measurement, the
stored data cannot be erased from
memory.
In that case, end the measurement
and reset the stopwatch by following
the procedure below.
②Press button
○
Ｃ
(recall button).
In the memory recall display, the
stored data can be erased irrespective of
which data is displayed.
③Keep button
○
Ｂ
pressed for more than 1.5 seconds.
While button
○
Ｂ
is kept pressed, the display below is shown
with warning beeps.
After 1.5 seconds, the stored data is erased from memory with
a long beep.
All the data is erased from memory and the initial measure-
ment display is shown.
※Unless button
○
Ｂ is kept pressed for more than 1.5 seconds, the
stored data will not be erased from memory.
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
(Memory clear procedure)
※When the memory clear procedure is performed, the mode
mark will move toward the "RECALL" mark.
Button
○
B
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
(Digits reset to "00")
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
(Start data)
Button
○
C
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
(Digits reset to "00")
