background image

English

13

English

12

CAUTION

•  The mechanism of mechanical watches is different from that of quartz 

watches.

 

When setting the time, make sure to turn back the minute hand a little 

behind the desired time and then advance it to the exact time.

3.  Pull out the crown to the second click when the small second hand is at the 12 

o’clock position. (The small second hand stops on the spot.)

 

Turn the crown to advance the hands until the date changes to the next. The time 

is now set for the a.m. period.  Advance the hands to set the correct time.

4.  Push the crown back in to the normal position in accordance with a time 

signal.

It is necessary to adjust the date on the first day after a month that has less than 

31 days.

CAUTION

•  Do not set the date between 8:00 p.m. and 2:00 a.m. If you do so, the 

date may not change properly on the following day or malfunction of the 

watch may occur.  

 Date adjustment at the beginning of the month

Ex.) To adust the date in the a.m. period on the first 

day of a month following a 30-day month. 

1.  The watch displays “31” instead of "1". Pull out 

the crown to the first click.

2.  Turn the crown to set the date to “1” and 

then push the crown back in to the normal 

position.

Summary of Contents for Cal. 8R39















Reviews: