English
21
English
20
TO PRESERVE THE QUALITY OF YOUR WATCH
Repair of divers watches requires special expertise and equipment. If you
find that your diver's watch is malfunctioning, do not attempt to repair it but
immediately send it to SEIKO CUSTOMER SERVICE CENTER.
n
TEMPERATURES
The key components in mechanical watches are made of metals, which expand or contract
depending on temperatures due to metal properties. This exerts an effect on the accuracy
of the watches. Mechanical watches tend to loss time at high temperatures while they
tend to gain time at low temperatures.
To prevent possible rusting
of the case and bracelet,
wipe them periodically with
a soft dry cloth.
n
CARE OF CASE AND
BRACELET
n
SHOCKS &
VIBRATION
Be careful not to drop
your watch or hit it
against hard surfaces.
n
PRECAUTION REGARDING
CASE BACK PROTECTIVE
FILM
If your watch has a protective film
and/or a sticker on the case back,
peel them off before using your
watch.
n
CHEMICALS
n
PERIODIC CHECK
2 - 3
Years
n
MAGNETISM
Your watch will be
adversely affected by
s t r o n g m a g n e t i s m .
Keep it away from
close contact with
magnetic objects.
N
S
It is recommended that the
watch be checked once every 2
to 3 years by an AUTHORIZED
SEIKO DEALER or SER VICE
CENTER to ensure that the
case, crown, gasket and crystal
seal remain intact.
Be careful not to expose the
watch to solvents, mercury,
cosmetic spray, detergents,
adhesives or paints. Other-
wise, the case, bracelet, etc.
may become discolored, dete-
riorated or damaged.
