7 D * * T e c h n i c a l I n s t r u c t i o n
No.4
No. PROSESS
ILLUSTRATIONS
AND
SPECIAL INSTRUCTIONS
Assembling the
wheels
Lubricate the lower
pivots of the
wheels.
↓
76
Set the spacer for
center wheel and
pinion.
↓
75
Set and lubricate
the minute wheel &
pinion.
↓
74
Set the
intermediate minute
wheel.
↓
73
Set the setting
wheel.
↓
72
Set the hour and
minute rotor.
↓
71
Set the second
rotor.
↓
70
Set the generating
rotor.
<72> Set the hour and minute rotor.
*Make sure to set the correct rotor.
(The hour and minute rotor and the
second rotor are different in their
specification.)
<74> Set the intermediate minute
wheel.
*Make sure the intermediate minute
wheel is put in the correct direction.
(See the illustration below.)
Lubricate the lower pivots of the
wheels.
*Type of oil, oil quantity: A0-2II-1
(To maintain good performance)
<73> Set the setting wheel.
*The setting wheel is reversible.
<76> Set the spacer for center
wheel and pinion.
*Firmly press down the
point of
engagement
to securely set it
without any clearance.
76#
5#
<75> Set and lubricate the minute wheel
& pinion.
*Type of oil, oil quantity: A0-3II-1
(To prevent parts from wearing)
<70> Set the generating rotor.
<71> Set the second rotor.
* Make sure to set the correct rotor. (The second rotor and the
hour and minute rotor are different in their specification.)
Hour and
minute rotor
Second
rotor
Distinction between the hour and
minute rotor and the second rotor
