79
78
Special clasps
A Type
A
Lift up the clasp to release
the buckle.
Open the flap.
Take the pin out of the adjustment hole, adjust
the size of the strap by sliding it back and forth,
and then put the pin back into the appropriate
adjustment hole.
Close the flap.
Buckle
Flap
Moveable loop
Fixed loop
Flap
Pin
Adjustment hole
3
4
2
1
C
A
B
There are 3 type of special clasps as described below;
If the clasp of the watch you purchased is one of them,
please refer to the indications.
A Type
→ P.79
B Type
→ P.80
C Type
→ P.82
4
To
Preserve
the
Quality
of
Your
Watch
4
To
Preserve
the
Quality
of
Your
Watch
81
80
・How to adjust the length of the leather band
With pressing buttons on both sides of the flap,
pull the leather band out of the moveable loop
and fixed loop. Then open the clasp.
Press the push buttons again to
unfasten the flap.
Pull the pin out of a adjustment hole of the band.
Slide the band to adjust its length and find an
appropriate hole. Place the pin into the hole.
Close the flap.
Fixed loop
Moveable
loop
Buckle
Push button
Flap
Pin
Adjustment hole
4
3
2
1
B Type
B
・How to wear or take off the watch
2
1
Press the button on both sides of the flap ;
pull the buckle up.
The band will automatically come out of the loop.
Place the tip of the band into the moveable
loop and fixed loop, and fasten the clasp by
pressing the frame of the buckle.
※Fixed loop
Moveable
loop
Push button
Buckle
Flap
4
To
Preserve
the
Quality
of
Your
Watch
4
To
Preserve
the
Quality
of
Your
Watch
83
82
Lumibrite
C Type
C
Press the button on the buckle,
and lift to open the clasp.
Pull the pins out of the adjustment
holes on the band. Slide the band to the
appropriate length. Push the pins into the
new holes on the band. Close the clasp.
Push button
Adjustment hole
Pins
1
2
If your watch has Lumibrite
Lumibrite is a luminous paint that is completely harmless to human beings and natural environment, containing no noxious
materials such as radioactive substance.
Lumibrite is a newly-developed luminous paint that absorbs the light energy of the sunlight and lighting apparatus in a short
time and stores it to emit light in the dark.
For example, if exposed to a light of more than 500 lux for approximately 10 minutes, Lumibrite can emit light for 3 to 5 hours.
Please note, however, that, as Lumibrite emits the light it stores, the luminance level of the light decreases gradually over time.
The duration of the emitted light may also differ slightly depending on such factors as the brightness of the place where the
watch is exposed to light and the distance from the light source to the watch.
4
To
Preserve
the
Quality
of
Your
Watch
4
To
Preserve
the
Quality
of
Your
Watch
Condition
Illumination
Sunlight
Fine weather
100,000 lux
Cloudy weather
10,000 lux
Indoor (Window-
side during
daytime)
Fine weather
more than 3,000 lux
Cloudy weather
1,000 to 3,000 lux
Rainy weather
less than 1,000 lux
Lighting apparatus
(40-watt daylight
fluorescent light)
Distance to the
watch: 1 m
1,000 lux
Distance to the watch: 3 m
500 lux (average room luminance)
Distance to the watch: 4 m
250 lux
84
Power source
85
The battery used in this watch is a special secondary battery, which is totally different from ordinary silver oxide batteries.
Unlike other disposable batteries such as dry-cell batteries or button cells, this secondary battery can be used over and
over again by repeating the cycles of discharging and recharging.
However, for various reasons such as long-term use or usage conditions, the capacity or recharging efficiency of the
secondary battery may gradually deteriorate. Worn or contaminated mechanical parts or degraded oils may also shorten
recharging cycles. If the efficiency of the secondary battery decreases, have the watch repaired.
When the secondary battery is fully charged, the overcharge
prevention function is automatically activated to avoid further
charging. There is no need to worry about damage caused by
overcharging no matter how much the secondary battery is charged
in excess of the "time required for fully charging the watch".
※ Overcharge prevention function
4
To
Preserve
the
Quality
of
Your
Watch
4
To
Preserve
the
Quality
of
Your
Watch
■ Remarks on replacing the secondary battery
・ Do not remove the secondary battery yourself.
Replacement of the secondary battery requires professional
knowledge and skill. Please ask a watch retailer for repair.
・ Never install a silver oxide battery for conventional watches in place
of the KINETIC E.S.U., which can generate heat that can cause
bursting or ignition.
WARNING
