(3) Executing form feeding: FF
Format:
ASCII
FF
Hex
0C
Decimal
12
Function:
Executes form feeding.
This command feeds the page to the next TOF position. If there are still enlarged
characters to be printed, they are printed, then form feeding is executed.
(4) Executing carriage return: CR
Format:
ASCII
CR
Hex
0D
Decimal
13
Function:
Executes carriage return.
This command moves the printing position to the left margin without printing any
characters. If the CR SETTING option is set to CR + LF in the EXTENDED
SETUP MODE, a carriage return is executed out after printing.
(5) Initializing the enlarged character mode: DC4 DC4 @
Format:
ASCII
DC4
DC4
@
Hex
14
14
40
Decimal
20
20
64
Function:
Initializes the enlarged character mode.
The following show the default settings for enlarged characters:
Cell expansion:
SETUP expansion
Height expansion:
SETUP expansion
Width expansion:
SETUP expansion
Font: SETUP
font
Character pitch:
10 cpi
HMI: Invalid
Cell offset:
6/180”
VMI: Invalid
Character quality:
Standard
Character layout:
Adjusted to the base line
Rotational angle:
0°
Smoothing: Valid
Top offset:
0/180”
Underline: Canceled
Character set:
Enlarged character mode selected
Right and left margins:
Enlarged character mode selected
Page length:
Enlarged character mode selected
Top and bottom margins:
Enlarged character mode selected
84
9. Bar code and enlarged character
