5
2-3 Pluging the Power Cord and Turning ON/OFF the Dryer
Plug the power cord of the dryer into the inlet after installing the dryer in the printer.
Follow the procedures below.
1.
(○)
Verify that the breaker switch of the dryer is turned off
, and plug
one edge of the power cord into the inlet matched with the
specifications.
2.
(│)
Turn on
the breaker switch of the dryer.
NOTE
The power specifications of the dryer are shown below.
-
Power voltage: 230 VAC ± 10 %
-
Power frequency: 50 Hz ± 1 Hz
-
Grounding: D class grounding (The 3rd class grounding)
Always use power supply matched with the power specifications.
Breaker Switch
Power Cord
