Seiki SC-610AUGCT, Instruction Manual

Page: 19 / 24

19
ALUMINIUM PARTS
• Clean the burner parts once a month to ensure nothing is clogging the
mechanism. Use a thin steel needle to remove any dirt, combustion residues
or spilled food residues from the burner holes.
• Remove the burner bodies from the cooktop and clean them the same way
as the enamelled parts, or use a nylon brush to remove any cleaning materials,
water or dirt.
• After cleaning, rinse and dry thoroughly.
• Clean the ignition plugs and flame failure probes carefully with a nylon
brush and methylated spirits to ensure proper ignition and operation of
the safety valves.
• Refit all burner parts to their dedicated spaces on the cooktop, ensuring they
are correctly in place. The hole in the ring of the burner fits over the
ignition plug. If it does not fit, you are trying to fit the burner body onto the
wrong burner.
• To check that all parts are reassembled correctly, light the burners and allow
them to dry out.
SERVICE/REPAIR
• The Gas Cooktop must ONLY be serviced by authorised personnel.
• If the Gas Cooktop isnt operating as it should be, please contact our
customer support on 1300 296 699.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF
• To keep the Gas Cooktop in proper working order, make sure to have
an authorised technician come and maintain/check the appliance on
a regular basis.
CAUTION!
OTHER USEFUL INFORMATION