- 22 -
7.8 Connecting to Hybrid HDC controller
The screw count number on P74 of Hybrid HDC controller can be changed by program
selecting on Scout II through the RS-232 interface port.
The only RS-232 (not USB) interface of HDC controller works with Scout II.
The min/max tightening time on Scout does not work for Hybrid HDC controller.
The only screw count number on Scout works for counter in HDC controller.
HDC Hybrid
controller
①
②
④
③
B side
A side (HDC)
Pin no
Signal
2
RXD
3
TXD
5
Ground
Pin no
Signal
2
RXD
3
TXD
4
Ground
⑨
①
USB(B) - RS232C cable 2M
B side
A side
∨
※
Refer to Hybrid manual
for selecting RS232 / USB
Summary of Contents for SCOUT II
Page 36: ... 35 ...