02
03
04
05
06
07
08
09
46.8 V
54.6 V
561 Wh
12 Ah
32 to 113°F (0 to 45°C)
Over-heating, short circuit, over-current, over-discharge and over-charge protection
0.1 kW, 160 W
Segway KickScooter
P65U
Approx. 46.9 × 25 × 47.8 in (1190 × 634 × 1214 mm)
Approx. 46.9 × 25 × 22.3 in (1190 × 634 × 567 mm)
Approx. 59.3 lbs (26.9 kg)
The scooter will automatically enter to PARK mode in the following circumstances:
1) Stop riding and the scooter is at a complete stop.
2) The start speed
≤
1.24 mph (2 km/h).
Note: The start speed is set to 3 km/h by default, only available to change via the Segway-Ninebot app
(0–3.1 mph [0–5 km/h]).
Exit PARK mode:
1) Squeeze the brake lever.
2) Press and hold the throttle till the speed
≥
1.86 mph (3 km/h).
Speed Modes Introduction
Mode/model
Press the Mode Switching Button twice.
Press the Mode Switching Button twice.
Press the Mode Switching Button twice.
Switching methods
When the USB port icon lights up, it means that the device (not fully charged) is connected to the USB port.
Symbol
EN
EN
It indicates that the scooter is connected to the Segway-Ninebot app.
The symbol displays the remaining battery power in battery bar.
The symbol indicates that the scooter has detected an error. The error code will display on the dashboard.
Please contact the after-sales service for repair.
Meaning
P65U (Speed limit)
(WALK)
(ASSIST)
Specifications
Item
Parameter
Rider
Product
Machine
Battery
Motor
Charger
Enable/Disable WALK mode via the Segway-Ninebot app.
Note: The headlight is always on and the tail light will keep flashing in WALK mode.
Name
Model
Length × Width × Height
Folded: Length × Width × Height
Net Weight
Max. Payload
Recommended Age
Required Height
265 lbs (120 kg)
18–60 years old
5'2''–6'6'' (160–200 cm)
Nominal Voltage
Max. Charging Voltage
Nominal Energy
Nominal Capacity
Charging Ambient Temperature
Battery Management System
Motor Type
Nominal Power
Brushless DC (BLDC) motor
0.5 kW, 500 W
Output Power
NCAF4813A/NCAF4812D
Model
Rated Output
100–240 V~50–60 Hz, 2.0 A MAX.
54.6 V
Input Voltage
Max. Output Voltage
Wheelbase
Ground Clearance
Max. Speed
[1]
Typical Range
[2]
Max. Slope
Traversable Terrain
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging (single)
35.6 in (903 mm)
3.1 in (79 mm)
Approx. 25 mph (40 km/h)
Approx. 40.4 miles (65 km)
Approx. 22%
Bicycle lanes, parks, campuses and most of the flat road conditions and typical Belgian roads
14 to 104°F (-10 to 40°C)
14 to 122°F (-10 to 50°C)
IPX5
Approx. 4 h
Name
Description
USB Port Icon
Bluetooth
Warning
Remaining battery
power
Adaptive Headlight
It indicates that the battery temperature has reached 60°C (140°F) or is below 0°C (32°F).
Temperature Warning
3.7 mph (5 km/h)
3.7 mph (5 km/h)
Enabling ASSIST mode via the Segway-Ninebot app:
Press and hold the throttle for 5 seconds to activate ASSIST mode.
Exit ASSIST mode:
Release the throttle and squeeze the brake lever, and slow down to zero speed.
0 mph (0 km/h)
21.7 mph (35 km/h)
21.7 mph (35 km/h)
11.2 mph (18 km/h)
2
When this feature is turned on, the headlight will work automatically to
adapt to a variety of situations and conditions and help illuminate the way.
When the icon flashes, it
means the Adaptive headlight
feature is turned on.
53.5 V 3A
DO NOT turn on the fast speed mode in bad weather!
DO NOT use this feature before familiarizing yourself with the scooter!
1) Press the Mode Switching Button twice to switch to SPORT mode.
2) Enable/Disable the fast speed mode via the Segway-Ninebot app.
Note: After activating the scooter, this feature is available only when the riding mileage reaches
3.1 miles (5 km).
25 mph (40 km/h)
When the icon lights up in red, it means that the fast speed mode is turned on.
When the icon lights up in white, it means that the fast speed mode is turned off.
SPORT mode
