Sega THE HOUSE OF THE DEAD III DELUXE, Operator'S Manual

Page: 88 / 112

80
www.seuservice.com
81
www.seuservice.com
•
POWER KEY .......................... This does not have power ON/OFF function.
Does not function even if it is pressed.
•
R/B KEY.................................. Used to select "R" for red adjustment or "B" for blue adjustment in the
STATIC CONVERGENCE ADJUSTMENT mode.
•

(UP shift) KEY................... Used to move the test cross upward in the STATIC CONVERGENCE AD-
JUSTMENT mode.
•
(LEFT shift) KEY.............. Used to move the test cross to the left in the STATIC CONVERGENCE AD-
JUSTMENT mode.
•

(DOWN shift) .................... Used to move the test cross downward in the STATIC CONVERGENCE
ADJUSTMENT mode.
•
(RIGHT shift) KEY ........... Used to move the test cross to the right in the STATIC CONVERGENCE
ADJUSTMENT mode.
•
TEST KEY............................... This is the ON/OFF key in the STATIC CONVERGENCE ADJUSTMENT
mode. In the ON status of this key, the test cross pattern appears in the ap-
proximately on-screen center.
•
ENTER KEY ........................... Used for DYNAMIC CONVERGENCE.
•
- KEY....................................... Used to decrease the adjustment data in the adjustment mode of CONTRAST,
BRIGHTNESS, HORIZONTAL/VERTICAL POSITIONS and WIDTH.
•
+ KEY...................................... Used to increase the adjustment data in the adjustment mode of CONTRAST,
BRIGHTNESS, HORIZONTAL/VERTICAL POSITIONS and WIDTH.
•
PICTURE KEY ....................... Used for the ADJUSTMENT mode of CONTRAST, BRIGHTNESS,
HORIZONTAL/VERTICAL POSITIONS and WIDTH.
Every time this key is pressed, the ADJUSTMENT mode proceeds as follows:
CONTRAST
ADJUSTMENT
MODE
BRIGHTNESS
ADJUSTMENT
MODE
H-POSI
ADJUSTMENT
MODE
H-WIDTH
ADJUSTMENT
MODE
V-POSI
ADJUSTMENT
MODE
V-HEIGHT
ADJUSTMENT
MODE
NORMAL
OPERATION
EXPLANATIONS OF ADJUSTMENT MODES
•
CONTRAST ..................Used to vary image contrast. Use + and - keys to adjust.
•
BRIGHTNESS...............Used to change image brightness. Use + and - keys to adjust.
•
H-POSI ..........................Used to move the image position in the horizontal direction. Use + and - keys to
adjust.
•
H-WIDTH......................Used to change the horizontal width of image. Use + and - keys to adjust.
•
V-POSI...........................Used to move the image position in the vertical direction. Use + and - keys to ad-
just.
•
V-HEIGHT.....................Used to change the vertical width of image. Use + and - keys to adjust.

