Sega THE HOUSE OF THE DEAD III DELUXE, Operator'S Manual

Page: 84 / 112

76
www.seuservice.com
77
www.seuservice.com
TEST MODE WRITING
POSITION
ADJUST
SELECT
RESET
R B G
PIC-ADJ
SET
P
ADJUST MODE
ADJUST MODE
ADJUST MODE
ADJUST MODE
ADJUST MODE
WRITING
Keep pressing the TEST button for approximately3
seconds.
Press the R button to have the red adjustment
mode.
Make adjustment by using the
 
ADJUST buttons.
Press the B button to have the blue adjustment
mode.
Press the WRITING button (for storing and finish).
The screen will change to AD-
JUST mode from the Game mode
to cause the green test pattern to
be displayed on the screen.
The red test pattern is added to
the display. The frame color
turns red and this signifies the red
adjustment mode.
Make adjustment so as to have
red superimposed on green.
When red is superimposed on
green, the color becomes yellow.
Similarly as in the case of red,
adjust the blue color. When
green, red, and blue are superim-
posed, the color becomes white.
The WRITING display appears
and the adjustment data is stored.
After the data is stored, the Game
mode returns.
When either of COLOR
SELECT buttons (R, B) is pressed, if the
color desired to be adjusted disappears,
press that particular button again. For
example, if the red color needs to be
adjusted again at the stage of , the R
button need to be pressed twice.
STATIC CONVERGENCE ADJUSTMENT
In the static convergence adjustment, each of red and blue images is comprehensively moved to and
superimposed on the green color. If automatic color matching function is not sufficiently satisfac-
tory, perform this adjustment. Be sure to perform automatic color matching before starting the above
adjustment.
DO NOT PUSH THIS.


1
2
3
4
5
2
4
4