Sega THE HOUSE OF THE DEAD III DELUXE, Operator'S Manual

Page: 27 / 112

18
www.seuservice.com
19
www.seuservice.com
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
Make sure that all of the adjusters are in contact with the floor. If they are not, the
cabinet can move and cause an accident.
Transport the product to the installation
position.
Have all of the Adjusters make contact with
the floor. Adjust the Adjuster's height by
using a wrench so that the machine position
is kept level.
When contacting the adjusters of the right
and left fences onto the floor, manually turn
them.
After making adjustment, fasten the Adjuster
Nut upward and secure the height of
Adjuster (FIG. 6. 4 b).
This product has 6 casters (4 for PTV Cabinet, 2 for CONTROLLER CABINET) and 8 Adjusters (4
for PTV Cabinet, 4 for CONTROLLER CABINET). (FIG. 6. 4 a) When the installation position is
determined, cause the adjusters to come into contact with the floor directly, make adjustments in a
manner so that the casters will be raised approximately 5 mm. from the floor and make sure that the
machine position is level.
FIG. 6. 4 b ADJUSTER
FIG. 6. 4 d
Provide ventilation space for the ventilation opening.
FIG. 6. 4 c
Refer to this Fig. (Scale:1/100)
for the layout of the place of
installation.
FIG. 6. 4 a BOTTOM VIEW
3
1
2
3
WARNING!
FASTEN UPWARD.
ADJUSTER
Approx. 5mm
ADJUSTER
CASTER
4 inches
8 inches
8 inches
ADJUSTER
CASTER
*NOTE: Pictures may dif
fer from actual unit.