Sega TETRIS GIANT, Owner'S Manual

Page: 103 / 214

94
EXPLANATION OF TEST AND DATA DISPLAY
9-3-2 OUTPUT TEST
This screen is for confirming the proper operation of each output device used by the game.
Periodically use this screen to check the status of each output device.
GAME TEST MODE
OUTPUT TEST
LAMP 1P START OFF
LAMP 2P START OFF
LAMP 1P LEFT OFF
LAMP 2P LEFT OFF
LAMP 1P RIGHT OFF
LAMP 2P RIGHT OFF
-> EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
1
Use the SERVICE Button to move the cursor to the item you would like to check. Press the TEST Button,
and the display on the right will change from "OFF" to "ON," and the lamp will turn on.
Press the TEST Button again, and the display will change from "ON" to "OFF," and the lamp will turn off.
If the lamp turns on and off, the wiring is functioning normally.
2
Each item is explained below.
LAMP 1P START Player 1 START Button
LAMP 2P START Player 2 START Button
LAMP 1P LEFT Player 1 joystick Left Button
LAMP 2P LEFT Player 2 joystick Left Button
LAMP 1P RIGHT Player 1 joystick Right Button
LAMP 2P RIGHT Player 2 joystick Right Button
3
When all tests are completed, move the cursor to EXIT and press the TEST Button. The GAME TEST
MODE screen reappears.
9
START BUTTON
1P START BUTTON
2P
LEFT BUTTON
1P
LEFT BUTTON
2P
RIGHT BUTTON
1P
RIGHT BUTTON
2P