Sega TARGET BRAVO, Operators & Service Manual

Page: 65 / 100

If the machine is positioned in location where only tokens are used, then the NRI Coin Acceptor can be programmed
to accept and credit special coins/tokens.
Please follow the instructions below to enable and program the TEACH & RUN facility.
In order to generate new acceptance bands you can teach up to eight coin channels using the lower switching block
on the coin validator. You will need at least ten coins of the new type. There is a different switch assignment for
the double and single block data-management:
Switching block S2 (with double block data-management)
DIL switch
S2.1
S2.2
S2.3
S2.4
S2.5
S2.6
S2.7
S2.8
S2.9
S2.10
off on
teach
teach
teach
teach
teach
teach
teach
teach
switch on
wide
Coin channel 9
Coin channel 10
Coin channel 11
Coin channel 12
Coin channel 13
Coin channel 14
Coin channel 15
Coin channel 16
Teach mode
Acceptance band
switch off
normal
By default, the eight teach channels have been programmed, so that one coin impulse is transmitted to the machine
via coin signal line 6, when a new coin is accepted.
TEACHING COIN CHANNELS USING TEACH MODE
TEACH AND RUN PROGRAMMING (NRI)
7-
5
NRI OPTIONS - TEACH AND RUN PROGRAMMING