Sega SONIC DASH EXTREME, Owner'S Manual

Page: 15 / 160

2
HANDLING PRECAUTIONS
1 1
For the IC board circuit inspections, only the use of a logic tester is
recommended. Using a Multi Tester or General Purpose Tester may result in
damage to IC Circuits.
Static electricity from your body may damage some electronics devices
on the IC board. Before handling the IC board, touch a grounded metallic
surface so that the static electricity can be discharged.
This video gaming cabinet utilises a motorised steering feedback system.
Do not attempt to service this part or any other part in close proximity to the
steering mechanism whilst power is applied.
Some parts are not designed and manufactured specifically for this game
machine. The manufacturers may discontinue, or change the speci
fi cations of
such general-purpose parts. If this is the case, SEGA cannot repair or replace
a failed game machine whether or not a warranty period has expired.
● If you need to perform any work not listed in this manual, request work from the
of fi ce indicated in this manual or the point of purchase, or inquires for details.
● Be sure to perform periodic maintenance inspections herein stated.
● Do not touch undesignated places. Touching places not designated can cause
an electric shock or short circuit.
● Whenever any fasteners (e.g. screws, nuts) have been lost, be sure to use re-
placement fasteners with the proper dimensions as specified in this manual.
If fasteners or any other
fi xings are used which do not correspond with the di-
mensions as outlined in this manual it may cause damage and/or separation of
parts that may result in secondary accidents.
● When connecting a connector, check the direction carefully. Connectors must
be connected in only one direction. If indiscriminate loads are applied in mak-
ing connections, the connector to its terminal
fi xtures could be damaged, re-
sulting in electric shock, short circuit or fi res.