Sega PIRATES of MONSTER ISLAND Page 73 Owner'S Manual Download

Page: 73 / 92

LAMPS AND

LIGHTING

TURN THE POWER OFF.

Remove the Billboard plate by following the BILLBOARD INSTALLATION GUIDE in reverse on Chapter

2 of this manual.

Disconnect the particular LED harness and carefully peel off the LED strip from the back surface of the

Billboard.

Remove the protective backing from the replacement LED strip and carefully adhere it into the same

location as the previous LED. Route the harness accordingly so that no shadowing will be notced once the

Billboard is in place.

Reconnect the harness and test before re applying the Billboard Plate.

13-2 FLUORESCENT TUBES - BILLBOARD

THIS WORK ON TOP OF THE CABINET, SHOULD NOT BE UNDERTAKEN WITHOUT THE

USE OF A SUITABLE STEP OR FOOTSTOOL.

Self Adhesive LED strip Pt No: DB6001UK (8)

Inc: LED strip/Adhesive Backing/Harness

LED REDEYE Pt No LT1055 (1)

Summary of Contents for PIRATES of MONSTER ISLAND





























































































Search results

Summary of Contents for PIRATES of MONSTER ISLAND

Reviews:

Related manuals for PIRATES of MONSTER ISLAND

Brands by name

Popular brands

Sega PIRATES of MONSTER ISLAND, Owner'S Manual

Search results

Summary of Contents for PIRATES of MONSTER ISLAND

Reviews:

Related manuals for PIRATES of MONSTER ISLAND

Brands by name

Popular brands