Sega PIRATES of MONSTER ISLAND Page 75 Owner'S Manual Download

Page: 75 / 92

LAMPS AND

LIGHTING

TURN THE POWER OFF.

The WAVE LED strips are located inside the Edge Brackets which help to secure the WAVE artwork

inplace.

LED Strip Locations

BASE (WAVE LED’S)

THIS WORK MAY REQUIRE LIFTING THE CABINET OR PLACING THE CABINET ON ITS

SIDE IN ORDER TO GAIN ACCESS TO THE LED STRIP BRACKET FIXINGS.
WHEN LIFTING THE CABINET, ALWAYS DO SO BY USING SUITABLE LIFTING

EQUIPMENT. NEVER ATEMPT TO BALANCE THE CABINET AGAINST ANOTHER

SURFACE IN ATEMPT TO GAIN ACCES TO THE FIXINGS ON THE UNDERSIDE OF THE

CABINET.
IF LAYING THE CABINET ON ITS SIDE BE SURE TO PROVIDE SOME CUSHIONING

TO PROTECT THE CABINET. ALWAYS GET HELP AND NEVER ATEMPT WORK SINGLE

HANDEDLY.

Summary of Contents for PIRATES of MONSTER ISLAND





























































































Search results

Summary of Contents for PIRATES of MONSTER ISLAND

Reviews:

Related manuals for PIRATES of MONSTER ISLAND

Brands by name

Popular brands

Sega PIRATES of MONSTER ISLAND, Owner'S Manual

Search results

Summary of Contents for PIRATES of MONSTER ISLAND

Reviews:

Related manuals for PIRATES of MONSTER ISLAND

Brands by name

Popular brands