Sega Giant Plants vs Zombies The Last Stand, Manual

Page: 46 / 78

37
CONTROL
UNIT
7
3
Remove the 4 screws which secure the Control Panel to the cabinet.
4
Carefully slide out the Controller Base and Control Panel in opposite directions as illustrated.
5
Remove the 4x M8 Hex Bolts located at the base of the Controller. Take care in disconnecting the Controller
Harness and remove the controler.
REMOVE FIXINGS
REMOVE FIXINGS
CONTROL
UNIT
7
7-1 REMOVING THE CONTROLLER
Be sure to disconnect the power from the machine before performing any work.
Failure to remove the power may result in electric shock or component damage.
1
Turn off
the power. Remove the 2x screws from the small trap plate located at the front of the Gun
base. Remove plate.
2
Remove the 2 screws from the trap plate located at the rear base of the controller. Remove plate.
REMOVE FIXINGS
REMOVE FIXINGS
SMALL FINGER TRAP PLATE
REAR FINGER TRAP PLATE