Sega Ghost Squad Deluxe, Service Manual

Page: 65 / 150

64
BOTTOM x y: Set the BOTTOM value.
The number on the left (x) is the horizontal component, and the number on the right (y) is the vertical
component. Aim the controller at the BOTTOM target and pull the trigger to set the value. This will not affect
horizontal calibration.
DEFAULT: Restore
calibration values to original settings.
CANCEL:
Restore calibration values to previous settings.
CURSOR:
Select CURSOR and aim the controller at the screen to display a round cursor (blue for 1P,
red for 2P) where the controller hits the screen. Use this cursor to check calibration.
OUT OF SCREEN:
Displays "OUT OF SCREEN" when the controller is pointed outside the screen.
Values cannot be set when the controller is out of screen.
Changes to settings are not enabled until the Test Mode is exited. After changing settings, be sure to exit
Test Mode.
After changing the settings, select EXIT and press the TEST Button to return to the Game Test Menu
Screen.