Sega Ghost Squad Deluxe, Service Manual

Page: 64 / 150

63
5.2.4. GUN ADJUSTMENT
Select GUN ADJUSTMENT to display the following screen.
This screen allows you to adjust the gun using the five calibration targets (TOP, LEFT, CENTRE, RIGHT,
BOTTOM). Use each target to calibrate as follows.
Use the standard gun controller, carefully aim at the correct target and pull the trigger to calibrate the value.
Select between the calibration targets with the 1P and 2P START buttons or SERVICE button.
Details for each item are as follows.
TOP x y:
Set the TOP value.
The number on the left (x) is the horizontal component, and the number on the right (y) is the vertical
component. Aim the controller at the TOP target (circle) and pull the trigger to set the value. This will not
affect horizontal calibration.
LEFT x y:
Set the LEFT value.
The number on the left (x) is the horizontal component, and the number on the right (y) is the vertical
component. Aim the controller at the LEFT target and pull the trigger to set the value. This will not affect
vertical calibration.
CENTRE x y: Set the CENTRE value.
The number on the left (x) is the horizontal component, and the number on the right (y) is the vertical
component. Aim the controller at the CENTRE target and pull the trigger to set the CENTRE value.
RIGHT x y:
Set the RIGHT value.
The number on the left (x) is the horizontal component, and the number on the right (y) is the vertical
component. Aim the controller at the RIGHT target and pull the trigger to set the RIGHT value. This will not
affect vertical calibration.