Sega Ghost Squad Deluxe, Service Manual

Page: 19 / 150

18
3.3. SECURING IN PLACE (ADJUSTER TUNING)
•
Make sure that all of the adjusters are in contact with the floor. If they are
not, the cabinet can move and cause an accident.
This product has 8 casters (4 for PTV Base, 4 for MAIN CABINET) and 6 Adjusters (4 for PTV Base, 2 for
MAIN CABINET). (FIG. 6. 4 a) When the installation position is determined, cause the adjusters to come
into contact with the floor directly, make adjustments in a manner so that the casters will be raised
approximately 5 mm. from the floor and make sure that the machine position is level.
1. Transport the product to the installation
position.
2. Have all of the adjusters make contact with
the floor. Adjust the adjuster's height by
using a wrench so that the machine position
is kept level. When contacting the adjusters
of the right and left fences onto the floor,
manually turn them.
3. After making adjustment, fasten the adjuster
nut upward and secure the height of
adjuster.
Refer to this figure for the installation layout Leave a gap for ventilation.