Sega Clay Challenge, Owner'S Manual

Page: 19 / 66

ASSEMBL
Y AND
INST
ALLA
TION
6
11
3 kinds as below.
FULL KIT
Atomiswave Main PCB included. This KIT will be able to install to Basic CRT monitor UR cabinets with
JAMMA connector on Main harness.
Installation:
1) Place New Overlay. Mount 28”Shotgun Assy (2), SOUND BD(1), START PUSH BUTTON (2) GUN
HOLSTER (2 sets) and harnesses to your cabinet.
2) Place NEW MARQUEE and INSTRUCTION.
3) Remove current GAME BOARDS from cabinet. Place ATOMISWAVE MAIN PCB with EX I/O
CARTRIDGE and GAME ROM CARTRIDGE.
UPDATE KIT WITH GUNS
Your cabinet must have ATOMISWAVE MAIN PCB and EX I/O CARTRIDGE in the cabinet. .
Installation:
1) Place New Overlay. Mount 28"Shotgun Assy (2), SOUND BD(1), START PUSH BUTTON (2) GUN
HOLSTER (2 sets) and harnesses to your cabinet.
2) Place NEW MARQUEE and INSTRUCTION.
3) Remove current GAME CARTRIDGE from ATOMISWAVE MAIN PCB. Make sure EX I/O CARTRIDGE
on there.
UPDATE KIT WITHOUT GUNS
Your cabinet must have ATOMISWAVE MAIN PCB, EX I/O CARTRIDGE and 28”Shotgun Assy (2) in your
cabinet.
Installation:
1) Place NEW MARQUEE and INSTRUCTION.
3) Remove current GAME CARTRIDGE from ATOMISWAVE MAIN PCB. Make sure EX I/O CARTRIDGE
on there.
6-1 INSTALLATION