Sega Clay Challenge, Owner'S Manual

Page: 51 / 66

11
43
TROUBLE
SHOOTING
TROUBLESHOOTING
11
11-1 TROUBLESHOOTING (WHEN NO ERROR MESSAGE IS SHOWN)
• In order to prevent electric shock and short circuit, be sure to turn power off
before performing work.
• Be careful so as not to damage wirings. Damaged wiring can cause electric
shock or short circuit.
• After removing the cause of the functioning of the Circuit Protector, reinstate the
Circuit Protector. Depending on the cause of the functioning, using the Circuit
Protector as is without removing the cause can cause generation of heat and fire
hazard.
• In the event that a problem cannot be resolved by employing the procedures
listed in this Manual, be sure to request service from the office shown on this
Manual or the dealer from whom the product was originally purchased. Attempts
to employ procedures other than those specified in this Manual can cause
electrical shock, shorting, or fire.
• In the event of a problem that is not described here, be sure to contact the
office shown on this Manual or the dealer from whom the product was originally
purchased. Careless attempts at repair can result in electrical shock, shorting, or
fire.
PROBLEMS CAUSE COUNTERMEASURES
Power is not supplied.
Power supply/voltage is not
correct.
Image adjustment is not
appropriate.
Sound volume adjustment
is not appropriate.
Board and Amplifier
malfunctioning
With Main SW ON,
no activation.
The color on the
is incorrect.
No sound is emitted.
Securely insert the power plug
into the plug socket .
Make sure that po wer supply/voltage is correct.
Adjust appropriately
Adjust sound vo
Perform the sound test and confirm
.
monitor screen
lume
The circuit braker on the power
supply functioned due to
momentary overcurrent.
After eliminatin the cause of overload,
have the circuit braker restored.