3) The DataLink device should be UNPLUGGED from the USB cable.
4) Plug the DataLink’s 25pin ribbon cable connector into the connector on the cartridge.
5) Plug the USB cable into the DataLink and into the PC. The DataLink’s LED indicator should
light.
6) Apply power to the Saturn. After the Main Menu of the PAR cartridge is displayed, start the
DataLink software on the PC.
When shutting down, first turn power OFF to the Saturn. Next, disconnect the USB cable from
the DataLink Device. Finally, remove the 25pin ribbon connector from the cartridge.
Step4 – Using the DataLink Software
This software enables you to transfer game-saves back and forth between your PC and the Saturn.
Also homebrew Saturn games may be downloaded to the Saturn.
Running the Saturn_USB software brings up the main screen.
Selecting
File
gives you the option to
Exit
, or
Configure
the com port.
Selecting
Transfer Data
allows you to open a window for:
Page 2 of 8
