Page 3.3
3.1.2. Switching off
To switch off the recorder, press the ON/OFF key (see paragraph 2.2).
The setup will be saved, the current file will be closed and the appliance will be turned off.
If the appliance is not switched off correctly, then press the ON /OFF button for 5 seconds.
In such case, the setup will not be saved.
Appliance without battery :
If the appliance stops without pressing the ON/OFF button (brutal stop of the power supply),
the setup will not be saved.
The appliance setup at next start will be the same as the one of the latest start or of the latest
acquisition.
3.2. Connection to the measuring circuit
You will use the terminal blocks provided with the appliance (ref 702200060 or
702400060).
3.2.1. Voltage measurement
The voltage measurement is performed between the + and – terminals of the relevant input.
The “┴” terminal is not used.
3.2.2. Temperature measurement with a thermocouple
The voltage resulting from thermocouple effect must be measured between the + and –
terminals of the relevant input.
The “┴”terminal is not used.
Summary of Contents for DAS220
Page 7: ......
