Page 3.1
3.
SETUP and PRECAUTION of USE
3.1. Switching on
Before switching on the appliance, make sure that the extension modules are connected.
Attention
: Never remove or put the extension modules under voltage. (DAS240
only)
You turn on the recorder by pressing the button at the top of the appliance.
When the appliance is on, the ON/OFF button is lit in blue.
After launching the software, the recorder displays a homepage that specifies the hardware
version, and then switches automatically to the “
Direct Display
” mode (oscilloscope).
You can display this homepage any time in the main menu by pressing the “
additional
option
” or “
start screen
” keys.
At power-up, the appliances start with the latest configuration when they were shut down
(see next paragraph).
If the configuration has changed at power-up, contact the after-sales service.
If the initial setup is wrong:
If the appliance still starts correctly : you can reinitialize the base setup, by entering the
main menu and clicking on the “
Default setup
” key.
Otherwise: You can switch on the appliance with the base setup: To do so, press quickly and
many times the “
ON/OFF
” key at power-up of the appliance until display of the front
page. A setup_error.cnf file will be created in the base folder of the internal SD.
Then contact the after-sales service.
Summary of Contents for DAS220
Page 7: ......
