SEFRAM DAS220, User Manual

Page: 25 / 80

Page 4.3
4.3. Setup menu
General configuration of the appliance, monitoring of the alarm outputs, network address
TCP/IP, calibration of the channels, update of the internal software.

Language: selection of the language of the appliance.

Screen intensity: adjustment of the delay (without or variable 1-30min)

Date modification : adjusting the time and date of the appliance (For NTP, see the Interface
paragraph)

VNC use: (see the Interface paragraph)

Setup administration : (see paragraph 13)

Setup initialization: initialization of the appliance in its typical setup.

Recover on disk: recovery of a setup saved on the internal storage or on USB stick.

Save on a disk: Saving of the setup on the internal storage or on USB stick.

Network : (see the Interface paragraph)

Additional options: Modification of the different parameters

Keypad beep: Activation or not of the keypad beep

Screen luminosity: Decrease of the backlight of the LCD screen.

Locking of the recorder (see paragraph 3.9)

Electric calibration (see paragraph 3.6)

Display of the start screen

Version update : update of the internal software (see paragraph 3.3)

Alarm A ,B,C or D : use of the alarm outputs A-D (output (0-5V)

Without: No condition monitors the contact, which always remains open.

Trip-out: Monitoring by combination of the analog or logical channels, on several
thresholds (see chapter Trip-out).