DreamStar Intro, Info, Auto patient manual
en GB – 23
DreamStar™ Auto / Auto Evolve
Step 2: Settings
In CPAP mode
This page displays only if the ramp feature and (or) the Pressure Alter feature and (or) the Comfort
Calib feature were activated by the home care provider.
The page displays:
Press
as many times as
necessary to
access the
desired
parameter
setting.
The page changes:
If the Comfort Calibration (C.C.+) is
disabled (OFF), you can enable it (ON).by
pressing the left or right parameter
settings button.
Press
to access the next menu
parameter.
Increase
or decrease
the
parameter value with the right or left
parameter settings button.
Press
at the bottom of the page or
to return to the page header.
Press
to move to the next page.
C.C. +
: Comfort Calib.
Comfort pressure:
Level of pressure produced by the device when the ramp feature starts up.
Ramp time:
Time the device takes to reach the prescribed pressure from the comfort pressure when the
time ramp (T.Ramp) is selected, otherwise this parameter is not displayed.
Pressure:
set pressure, level of pressure prescribed, which may be altered by
±
1 cmH
2
O if the Pressure Alter
feature has been enabled by your home care provider.
In Auto-CPAP mode
This page displays only if the ramp feature and (or) the calibration feature were activated by the home care
provider.
The page displays:
Press
as many times as
necessary to
access the
desired
parameter
setting.
The page changes:
If the Comfort Calibration (C.C.+) is
disabled (OFF), you can enable it (ON) by
pressing the left or right parameter
settings button.
Press
to access the next menu
parameter.
Increase
or decrease
the
parameter value with the right or left
parameter settings button.
Press
at the bottom of the page or
to return to the page header.
Press
to move to the next page.
Summary of Contents for DreamStar Auto
Page 40: ...en GB 40 DreamStar Intro Info Auto patient manual ...
Page 41: ......
