SEFAM DreamStar Auto, Patient Manual

Page: 14 / 42

en GB – 14 DreamStar Intro, Info, Auto patient manual
Transporting the device
Unplug the device and disconnect the accessories from the device. Store them in the carrying case.
DreamStar™ or DreamStar™ Evolve device with cover
You must separate the cover from the device. Detach the cover from the machine by pressing on "Push" at
the top of the device. Then, lift the cover back and remove it from the device. Place the cover and the
device in the separate compartments of the carrying case.
DreamStar™ Evolve device with water chamber
You must remove the water chamber from the device and drain it. Detach the water chamber from the
machine by pressing on "Push" at the top of the device. Then, lift the water chamber back and remove it
from the device. Disassemble it by following the instructions under "Cleaning and Maintenance", on page 31
and empty the water chamber completely. Place the chamber and the device in the separate compartments
of the carrying case.
CAUTION
To eliminate any risk of introducing water into the device and thereby causing irreversible damage, the
water chamber must be completely emptied before moving or transporting the device.
Using a memory card
An external storage medium can be used either to store the most recent compliance data stored in the device,
or to update your device's setting parameters. Refer to the instructions given by your home care provider to
use this card.
If the device is running, turn it off before you insert the memory card into the memory card connector: the
symbol
appears to the right of the display header. If this symbol flashes, the card is inserted
incorrectly, or inserted upside down, or it is not operational. Reinsert it correctly, and if the symbol is still
flashing, contact your home care provider.
Updating Settings
If the care provider has configured the memory card to update the settings of the machine, the device will
start automatically when inserting the card into it. Once the update is complete, a message appears asking
to remove the card. Remove it. This operation can be performed only once.
Data Backup
Data backup starts automatically when inserting the card into the machine. An indicator allows the progress of
the data downloaded to be monitored. Once the data has been recorded, a message displays on the device
"DOWNLOAD FINISHED. REMOVE MEMORY CARD." The memory card can then be given to your home care
provider.
Notes:
•
The backup data and update settings functions are only accessible if the device is in standby.
•
If the card is left inside the device, the machine cannot be turned on and no feature can be accessed.