37
9. Dismantling/reassembly
B / 18.12.2017 - OM.MAI.93EN - 11/14
9.1.4
Assemble pump
9.1.4.1
Assemble lantern (200)
9.1.4.2
Assemble drive (ANT)
9.1.4.3
Assemble centering cover (560), shaft seal (SEA)
Risk of injury due to lack of stability of
pump. Crushing of body parts due to the pump or
pump parts tipping or falling down.
Design with base plate
Fasten base plate
(GPU)
to secure pump.
–
Recommendation: Fasten to suitable base
using a screw fitting
(SCH)
.
Design without base plate
Fasten lantern
(200)
to secure the pump.
–
Recommendation: Fasten to suitable base
using a screw fitting
(SCH)
.
Assemble lantern
(200)
with screw fitting
(SCH)
to base plate
(GPU)
.
Clean flange bearing surfaces
(FLS)
, centering
surface
(ZD)
and output shaft of the drive
(ANT)
.
Assemble drive
(ANT)
with screw fitting
(210,
212, 213)
on lantern
(200)
.
For easier assembly of the splash ring
(310)
ap-
ply anti-seize graphite petroleum to the inner
surface of the splash ring
(310)
and output shaft
of the drive
(ANT)
.
Push the splash ring
(310)
loosely onto the out-
put shaft of the drive
(ANT)
.
–
Note the fitting position of the splash ring
(E)
("SEA" label).
Push on the shaft seal
(SEA)
, casing gasket
(501)
and centering cover
(560)
.
–
See shaft sealing reassembly (
Chapter
9.4).
Assemble centring cover
(560)
with screw fitting
(507, 509)
.
