31
9. Dismantling/reassembly
B / 18.12.2017 - OM.MAI.93EN - 5/14
Moisten outer surface of rotor
(600)
with lubri-
cant
(GM)
.
Moisten inner surface of stator
(601)
with lubri-
cant
(GM)
.
Slide stator
(601)
onto rotor
(600)
by turning it.
–
Use tool
(W2)
.
Check seal
(569)
for wear and replace if neces-
sary.
Insert seal
(569)
into stator capture
(568)
.
Slide stuffing part
(535)
and stator capture
(568)
onto stator
(601)
.
Slide pressure branch
(700)
onto stator
(601)
.
Insert tie bolts
(602)
loosely into pressure branch
(700)
, slide them through the stuffing part
(535)
and install on stator capture
(568)
.
Check seal
(536)
for wear and replace if neces-
sary.
Insert seal
(536)
into feed hopper
(500)
.
Prop up coupling rod
(400)
with support
(S)
.
Place unit comprised of pressure branch
(700)
,
rotor
(600)
, stator
(601)
and stuffing part
(535)
on
the base plate
(GPU)
.
Insert rotor
(600)
into coupling rod
(400)
.
Preassemble screw fitting
(SCH)
between pres-
sure branch
(700)
and base plate
(GPU)
.
