32
9. Dismantling/reassembly
B / 18.12.2017 - OM.MAI.93EN - 6/14
9.1.2.2
Assemble dry-running protection device (TSE) (optional)
Assemble dry-running protection device
(TSE)
.
–
Observe associated documents (
chapter 12.1) of the operating and
assembly instructions.
9.1.2.3
Final installation of the pump
Unscrew rotor
(600)
from stator
(601)
to the ex-
tent that drillings in the coupling rod head
(400)
and rotor head
(600)
correspond.
–
Use tool
(W2)
.
For joint
(G)
reassembly, refer to the document
Rotating unit-components parts (
chapter 9.2).
Risk of injury through incorrect as-
sembly. Fingers could be crushed when the
repositioning the stuffing part. Use the grips on
the stuffing part
(535)
for repositioning.
Slide stuffing part
(535)
onto feed hopper
(500)
.
Assemble stuffing part
(535)
using screw fitting
(538, 539)
.
Assemble screw fitting
(590, 591)
between stuff-
ing part
(535)
and stator capture
(568)
.
Tighten screw fitting
(SCH)
between pressure
branch
(700)
and base plate
(GPU)
.
Assemble screw fitting
(SCH)
between pipeline
and pressure branch
(700)
.
