manualshive.com logo in svg

Seenergy svr-632s nvr, User Manual

Share
Download
Seenergy svr-632s nvr User Manual Download Page 228

228 

SVR-632U/S User Manual

 

 

The USB hard disk(s) will be listed in the drop-down menu displaying 
the remaining disk space. Make your selection from the drop-down 
menu if you have more than one disks connected to the NVR.

 

 

Next, select channels which you would like to backup the recording 
data from. Maximum 4 channels can be selected at once.

 

 

Configure the start and end time of the recording data you would like 
to backup and click the “Backup” button to begin.

 

 

Things to pay attention to the USB Backup function

 

 

Limitation:

 

• It does not support USB Hub extend the number of HDD connected 
to the NVR

 

• Only one backup process can be performed at a time

 

• Maximum 4 channels can be selected for backup

 

• Only FAT32 USB hard disk is supported for backup

 

Summary of Contents for svr-632s nvr




















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands