33
Seeport
4 User Manual
Expansion Connectors
Two Seeport mixers can be connected and operated in a ’master/slave’ configuration. The 10 mixed outputs
from the one mixer (slave) are fed to the 10 mix buses of the other (master). The connection is made via a
25-pin D-sub expansion cable. This allows, for example, a 7 channel and an 11 channel mixer to be used
together as an 18 channel mixer.
The cue signal buses in the two mixers are directly connected together.
The 0 volt references of each mixer are directly connected together.
Pin configuration of the multi-pin connectors and cable connections are shown below.
5.
TECHNICAL INFORMATION
Insert Points Connectors
Insert points for inputs are connected on a 9-pin D-sub connector on the back panel above each module.
Pin-outs and views are shown below.
