Seeley CW-H 2020 PLC, Owner'S Manual

Page: 8 / 32

6 | 859731-D
ILL3670-A
Step Action
1 Open unit by pulling on bottom side of the display (1)
2 Ensure correct side of base faces up
3 Pull cables 150 mm (5.90 in.) out from wall
4 Align base and mark location of two mounting holes on wall or panel (2)
CAUTION!
Always make sure there are no electrical cables, gas or water pipes, or the like, behind
where you intend to drill.
5 Install anchors (NOT INCLUDED) in wall (3)
6 Insert cable in central hole of base
7 Place rear cover on the wall and align it with mounting holes (4)
8 Insert screws (NOT INCLUDED) in mounting holes on each side of base (5)
9 Insert POWER and CONTROL wiring according to wiring chart
10 Gently push excess wiring back into hole
11 Gently align cover to top of base and snap in place from bottom (6)
12 Install the isolated screw connection for securing the plastic housing (7)
PHYSICAL DESCRIPTION & MOUNTING
WALL CONTROL INSTALLATION INSTRUCTIONS
ILL3671-A
ILL3670-A