SARK-110
User’s Manual
Rev 1.2.19 January 12
th
, 2020
- 42 -
© Melchor Varela
– EA4FRB 2011-2020
selected or automatically tracked. They are also useful for indicating characteristic points in the
plot.
Use Navigator A to highlight
«MODE»
in the main menu.
Press the Select
[
■
]
button to activate
the Mode popup submenu and use Navigator B to highlight
«Scalar Chart»
submenu mode
option. Finally press the Select
[
■
]
button to enter Scalar Chart mode.
The analyzer performs measurements and updates the plot continuously if the Run Mode in the
«SETUP»
menu is set to Continuous. The sweep can be stopped at any time by pressing the
Run/Hold
[
►||
]
button. If the Run Mode in the
«SETUP»
menu is set to Single Shot, the sweep
automatically stops on completion of a single pass. Press the Run/Hold
[
►||
]
button to start a
new sweep.
The results of the measurements are kept in internal memory and plotted on the display to
permit user analysis. The measurements can be resumed at any time by pressing the Run/Hold
[
►||
]
button again. Measurement data can be stored at any time on the internal disk by pressing
the Save Screen
[
●
]
button
and restored later for review through different options in the
«FILE»
menu.