11
（
8
）
Annotations of Ca Parameters
Oscilloscope Calibration
：
Press
�
||
XI
Application
Application
Application
Application Examples
Examples
Examples
Examples
1.
1.
1.
1.
Example
Example
Example
Example One:
One:
One:
One: Measure
Measure
Measure
Measure Simple
Simple
Simple
Simple Signal
Signal
Signal
Signal
Observe one unknown signal in a circuit, quickly measure & display the signal’s frequency & peak-to-peak value.
Please operate according to following steps:
�
Connect the channel probe to the detection point of the circuit.
�
Set the Channel mode as AUTO, adjust the (Horizontal) time calibration and (Vertical) voltage calibration,
make sure the signal displays clearly.
�
Adjust Threshol horizontal triggering position to make signal display stable.
�
Use “▲” or “▼” to choose Me items in Measurement Area, then press “OK”, use
“◄” or “►” to choose the
Cal Zero
Calibration without voltage
CalRange
Calibration with voltage
Restore
Master Reset
