13
（
2
）
Measure peak-to-peak value of the signal source.
Please operate according to following steps:
�
Use “▲” or “▼” to choose Yn items in Measurement Area
�
Press
“
OK”
�
Use “◄” or “►” to choose CursorV1
�
Use “▲” or “▼” to adjust the position of CursorV1 to the crest
�
Use “◄” or “►” to choose CursorV2
�
Use “▲” or “▼” to adjust the position of CursorV2 to the valley
And get
：△
V=2.08V. i.e. the cycle of signal source, as shown in the image below:
3.
3.
3.
3.
Example
Example
Example
Example Three
Three
Three
Three
：
Save
Save
Save
Save waveform
waveform
waveform
waveform image
image
image
image
Sometimes waveform images need to be archived or analyzed on PC platform.
Please operate according to following steps:
�
Use “
▲
” or “
▼
” to choose the Fn items in Measurement Area, press “M”, use “◄” or “►”to choose Save
Bmp, and then use “◄”or “►” to choose the file name on the lower right corner of the screen ,e.g.Save000.BMP
，
as shown in the image; and then press
“
�
||” to save it to the built-in U disk.
�
Just copy the image to your PC, and you can analyze the waveform
V1
V2
