32
APPENDIX
A. SERIAL COMMUNICATIONS
A.1
801 Initiated output
A.1.1 Function
This type of communication includes end-of-run data transmissions (Autoprint), and configuration data
transmissions. Autoprint, which can be selected or inhibited from the setup menu, transmits data at the
end of a "run" or when the STOP switch (or foot-switch) is pressed. This would be used with a printer or
data logger. The configuration transmission is initiated by holding the MENU switch down during power
up. This is usually done to obtain a printout, or "hard copy" of the configuration information.
A.1.2 End of Run Data Transmission
A.1.2.1
TOTAL mode
format =
"COUNT= xxxxxxxx CR+LF"
End of run is when bowl empty is sensed.
A.1.2.2
SINGLE BATCH mode
format =
"COUNT= xxxxxxxx CR+LF"
End of run is when terminal count reaches zero and 801 displays "FINISHED".
A.1.2.3
BATCH REPEAT mode
format =
"COUNT= xxxxxxxx CR+LF"
"BATCHES= xx CR+LF"
End of run is when terminal count reaches zero at end of each batch and also when bowl
empty is sensed.
A.1.2.4
MULTIPLE BATCH mode
format ="COUNT= xxxxxxxx CR+LF"
"GROUP= xx CR+LF"
"BATCHES= xx CR+LF"
End of run is when terminal count reaches zero at end of each batch and 801 displays
"FINISHED".
