S-Series
4 Device Overview
6
4.2
Rear Panel
(1)
Signal Input:
Neutrik® XLR sockets for analogue or digital (AES3) signals. Sockets 1 and 3 are used for
the two-channel AES3 signals.
(2)
Signal Link:
Parallel XLR outputs for daisy-chaining the signal to other amplifiers.
(3)
Loudspeaker Connectors:
Neutrik® SpeakO
n™ receptacles for connecting the loudspeakers.
(4)
Ethernet Ports:
2x RJ45-c
ompatible Neutrik® EtherCon™ sockets for connecting to a network. With switch
for direct connection (daisy-chaining) to other amplifiers.
(5)
Mains Connection:
Neutrik® PowerCon™ socket for connection of a 3-wire power cable according to local
regulations. Socket can be switched under load and has the function of a mains switch.
For fractions of a second, the amplifiers can draw peak currents far in
excess of what is listed under
“Rated Current Consumption” in the
data table. We recommend operating the amplifiers on circuit break-
ers with C characteristics.
