S-Series
5 Operation
16
5.5.6.1
Snapshot Tab
1
Save to Lib: Saves the current device state (i.e. all currently set parameters) to a snapshot
slot on the device. This can be an empty one or one with an existing preset to be overwrit-
ten.
2
Recall from Lib: Loads a snapshot previously saved on the device.
3
Delete Snapshot Memory: Deletes all snapshots (empties all memory slots) on the device..
5.5.6.2
Amplifier Tab
1
Gain: Allows adjustment of the nominal power amp gain in the range of 26dB to 44dB. The
default value is 32dB. This setting has no effect on the limiter thresholds set in the speaker
presets.
2
LZ/HZ: Allows switching between low-impedance operation (
“Low Z” is set by default) and
operation on 35V, 50V, 70V and 100V lines.
3
0 dBFS IN: Allows adjustment of the reference level of the digital audio inputs (AES3) or
network audio inputs (AES67) if they are installed.
