10
Typical file sharing application in a home/SOHO network
6. CONFIGURING THE SE-NAS-05
SE-NAS-05 features a web-based control interface to manage your settings. To configure the SE-NAS-05, connect it to the network
router/switch in your network, or connect to a client PC through the LAN port. Section 6.1 ~ 6.2 describe the procedure of remote
configuration from different kinds of client PC.
The LAN port on SE-NAS-05 is
Auto-MDI/MDIX, which means you can
connect it using either a crossover or a
direct network cable.
Either the USB port or the LAN port of
SE-NAS-05 can be used at any one
time. If you changed the connection
from USB to LAN, or vice versa, please
power off and then power on the
SE-NAS-05, otherwise abnormal
operation may occur.
When you reset the SE-NAS-05 either by the reset button or through the web control, all user settings will be
erased and replaced with factory default values. The most important default values useful for first-time
configuration are shown below:
z
Default administrator user name = admin
z
Default administrator password = admin
z
Default IP address: 169.254.0.1
Default host name = storage-XXXX (where XXXX is the last four digits of the MAC address of SE-NAS-05,
printed on the back panel).
How to restore factory setting: Power off the SE-NAS-05
Æ
press and hold the reset button
Æ
Power on the
SE-NAS-05 and then wait for at least 10 seconds
Æ
Release the reset button.
Summary of Contents for SE-NAS-05
Page 1: ...1 SE NAS 05...
