4.2 Receiving calls
When a call arrives, the ringing tone sounds on the handset and on the base station. The handset will ring a
little later than the base station due to the radio transmission. The message CALL. will flash in the display.
Press the call button
on the handset and the connection will be made. The call indicator on the base
station will flash during the call.
Note: While handset is ringing, you can adjust the ringer volume by means of the
and
buttons.
Notes: Please refer to Chapter 6 for information on how to show the caller’ s number in the display. When
the automatic call accept feature is selected, the call is automatically accepted as soon as you lift the
handset from the base station. You can find out in Chapter 7.6 how to switch the automatic call accept
feature on or off.
4.3 Making calls
1.
Enter the required telephone number and letter with a maximum of 32 digits using the number pad. As
the display is only capable of showing 12 digits, in the case of longer phone numbers only the last 12
digits are displayed.
Note: If you have entered a number incorrectly, you can delete the number by repeatedly pressing the
button. The number is completely deleted by pressing the
button for a long time
2.
Press the call button
and the required connection will be made.
Operation
Note: You can also get a dialing tone by first pressing the call button
. On entering the digits of your
required phone number, your telephone will dial the number directly. With this method of making a call, it
is not possible to correct individual digits in the number in the manner described above.
4.4 Dialing stored numbers from the phone book
After you have stored a few phone numbers (refer to Chapter 5.1), you can call these up very quickly and
easily.
1.
Pressing the phone book button
. The display will now show the first number stored in alphabetical
order.
2. You can now select all of the stored numbers with the
and
buttons. To choose a phone
number directly alphabetically, press the appropriate letter.
3. Now press the call button
and the telephone number displayed will be automatically dialed.
4.5 Call duration display
The call duration in hours, minutes and seconds is shown in the display during a call. Ten seconds after
dialing, the display will switch from showing the number dialed to showing the duration of the call. The
- 11 -
Summary of Contents for SE-DECT-V1
Page 1: ...DECT Wireless PSTN VoIP 2 in 1 phone User manual...
Page 34: ...3 4 34...
Page 35: ...5 6 35...