Setting up
Important note: Place the handset in the base station with the display to the front for at least 16 hours.
The telephone may malfunction if the batteries are not properly charged. The charging light
on
the base station will come on.
3.5
Charging the standard batteries
The rechargeable batteries for your telephone have a stand-by time of max. 200 hours at room temperature
and a maximum talk time of up to 10 hours.
The current battery capacity is shown in the display.
If the battery capacity is too low, the symbol will flash in the display and you will hear warning tones every
60 seconds.
To charge the batteries, place the handset in the base station with the display to the front.
3.6
Tone(TD) or pulse (PD) dialing
This trend-setting feature enables you to use your telephone both on exchanges with Pulse dialing/PD and
on exchanges with Tone Dialing/TD. The unit is set in the factory to Tone dialing. If your telephone does not
work on your exchange, you can find out under Section 8.4 how to set up your telephone for pulse dialing.
3.7
Fitting the belt clip
Slide the belt clip into the guide until it audibly engages at the sides
Setting up
3.8
Setting day
Your telephone is equipped with a clock including an alarm function. The current day is shown in the display.
You should set the day before using the mobile unit.
1.
Press the menu button
.
2.
Select the HS SETTINGS menu with
and
and confirm with
.
3.
Select the DATE TIME menu with
and
and confirm with
4.
Select the DATE FORMAT menu with
and
and confirm with
5.
Select the DD-MM or MM-DD menu with
and
and confirm with
6.
Now enter the current day in any format you want using the number pad
- 9 -
Summary of Contents for SE-DECT-V1
Page 1: ...DECT Wireless PSTN VoIP 2 in 1 phone User manual...
Page 34: ...3 4 34...
Page 35: ...5 6 35...
