14
4.0
Mechanical Installation
4.1
Installing the Enclosure
Install the MR-2320 Series panel enclosure as shown below. Mount enclosure surface mount
using the four mounting holes with the provided screws.
Figure 1
Box dimensions, semi-flush mounting and trim ring
Note:
Installation, use and maintenance should be in accordance with the
manufacturer’s documents and the National Electrical Code, ANSI/NFPA 70, and
the National Fire Alarm Code ANSI/NFPA 72.
i
17"
22.5"
Adhere trim ring to
wall surface around
the MR-2320 backbox.
PLACE MR-2320 TRIM RING OVER BACKBOX
14.5"
4.
5"
11"
20.0"
1.5"
5.425"
14.5"
3.5"
1"
3.5" is the maximum depth
for semi-flush mounting
using the flush trim ring
1" is the minimum depth
above the wall required
for semi-flush mounting
using the flush trim ring
4 Mounting
Holes for
Surface
Mounting
Summary of Contents for MR-2320 Series
Page 2: ......
