SecurteX MDVR Manual
17
System Start-up/ Shut down
System Start Up
After connecting the MDVR to a vehicle power supply turn on the vehicle ignition and the unit will
automatically start recording. Power is normally supplied to the MDVR as long as the vehicle ignition is
ON. Start-up process takes approximately 10 seconds and completes as follows:
•
A short series of start-up diagnostic test to ensure system stability
•
Recording from connected cameras begins immediately (factory default)
•
“Display only view” of the cameras is immediately available to be viewed through Video Output 2 in
quad view.
No handheld IR controls are accepted by MDVR when video output is connected to V 2
•
“Administrative view” of the system is available to be viewed through Video Output 1.
All the
handheld IR controls are accepted by MDVR when video is connected to V 1 or VGA
Note: The MDVR factory settings are programmed to display administrative view on VGA monitor. If the
MDVR is connected on the Video output 1, press the VIDEO button on the IR to switch to composite monitor
output. Please see a list of factory default settings under “System Default Settings” explanation page.
System Login for Setup Functions
The unit have password authorization enabled in order to enter setup. The IR will not response to any
commands until SETUP or LOGIN key is pressed for validating the user authority of the MDVR. To enter
a password:
•
Press the LOGIN/LOCK or SETUP key on the handheld controller
•
When a menu appears on the display, enter the Unit ID and stored password
(Default unit is 000 and
password is 88888888)
•
Press ENTER on the handheld controller. If the password is accepted, the setup menu will appear.
Two levels of password are available in the setup.
•
USER PASSWORD CORRECT indicates permission is limited to playback, advertisement,
movie and music. Default USER password is 22222222.
•
ADMIN PASSWORD CORRECT indicates full access to MDVR. Default ADMIN password is
88888888.
** The unit has a built in SUPER Password, in case the ADMINISTRATIVE password does not work. It is a
back door entry to the unit which cannot be changed. The password is 19810512.
IT IS HIGHLY
RECOMMENDED TO STORE THIS PASSWORD IN A SAFE PLACE.
