SecurityMan PalmWatch II, User Manual

Page: 14 / 20

Rechargeable Battery Pack for camera (BP200)
Note: The battery pack BP200 must be fully charged for 12 hours before
independent use.
Plug the PalmWatch II camera AC adapter (9V 400mA) connector into the DC
jack at the end of the Battery Pack (9V 400mA). Plug the adapter itself into
an electrical outlet. Move the Slide Switch on, a red LED on the base of the
camera indicates that the camera is on.
LED indicator on Battery Pack
A pink LED will appear on the Battery Pack to indicate charging. A fully
charged Battery Pack will produce a green LED.
After the initial charge, it is not necessary to leave the camera AC adapter
(9V 400mA) plugged in the Battery Pack. You may unplug the adapter from
the DC jack and reconnect it when necessary.
14
Power Jack for cam-
era AC Adapter
(9V 400mA)
LED indicator
Slide Switch