SecurityMan LCDDVR4, User Manual

Page: 51 / 78

45
al speed and set to 1 to slow the rotational speed, the system default setting is 8.
PRESET : Ranges from 1~32 for PELCO-D protocol camera and 1~255 for PEL-
CO-P protocol camera, the system default setting is 1 for both protocols. When 0
is display, the preset is not use.
Press the Menu/ESC button on the front panel, RC or right mouse click on the
mouse at anytime to exit out from the PTZ setup window.
Button function Front Panel / Remote Control
[SEL/EDIT]: To select or increase value.
[Up][Down]:Move the cursor up and down accordingly.
[REC]:Reduce Value or Auto-scan.
[Ch1][Ch2]: Move the dome upwards and downwards.
[Ch3][Ch4]: Move the dome leftwards and rightwards, increase/decrease value.
[STOP]:Stop the dome.
[REW][FWD]:Zoom.
[Pause][Play]: Focus.
Mouse function
Left Mouse button: Click the icon “►” or “◄” to adjust value.
Right Mouse button: Previous.
Preset setup
To setup a preset position for the dome; choose a Preset 1~255 (depend on pro -
tocol), click on PTZ mode , right mouse click to bring up the Icon function (below),
adjust to desire angle view, click on exit, and then press on
Save Preset
. To
check or recall the preset, select the Preset and then click on Call Preset.
Auto scan can be performed when presets are configured within cruise locus.
Note
: The address, protocol and baud rate of DVR should be setup according to
the dome’s requirement, please reference the dome’s user’s manual for setup
detail.